FENCING TOOLS

The CHANNELLOCK® fence tool has the features that you need to install and maintain wire fencing - all-in-one strong, reliable tool.

Tool for attaching fencing to a post with a tie-wire clip.
Crafted of sturdy nickel plated steel for longevity.
Two-in-one tool with a flathead screwdriver tip on one end.

Tool for attaching fencing to a post with a tie-wire clip.
Available in 4" or 6". Crafted of sturdy nickel plated steel for longevity.
Two-in-one tool with a flathead screwdriver tip on one end.

Specifically designed for cutting, stripping and bending electric fence wire with minimum damage to wire.

Quickly and easily obtain a digital reading of your fence voltage with the Gallagher Fence Volt Meter. Monitors fence voltage and helps trace shorts in the fence line.

Displays fence voltage from 10kV to 12kV in 1,000 volt increments and shows fence voltage in 100V increments under 10kV.

Very handy tool for checking ground performance/voltage and comes with an auto ON/OFF function.

Save Hours Checking Fence Lines for Shorts!

Gallagher's Fault Finder is a top of the line current meter and digital volt meter built to help you identify and locate faults in your electric fence line. The Fault Finder measures voltage, current and shows the direction of current flow.



The extendable voltage probe allows you to easily measure voltage at points of difficult access such as cut out switches and Energizer terminals.



While sized to fit conveniently in your pocket (2.5" x 5"), the Fault Finder is still easy to read and lasts up to 3 years with an internal coin cell battery that can easily be replaced by a qualified professional.

Wire Cutter for high tensile 12.5 gauge wire.

A professional tool for use with permanent wire tighteners for electric fence.

GALLAGHER 2 GROOVE WIRE SPLICE TOOL

4 Groove, robust, tool for crimping wire joiners and splicing wire.

GARDNER BARB WIRE UNROLLER

for adjusting the position of the Gripple Plus products prior to load being applied
https://youtu.be/N3maSOqMNJg

BARED WIRE UNROLLER HITCH

JAKES WIRE TIGHTENER HANDLE

Fence meter with fault finder.
Measures fence performance to help diagnose problems.
Reads up to 19.9 kilovolts.
Powers on automatically when it detects a pulse signal displaying the voltage in kilovolts.
Mode button will display the current flow in amps and shows the direction of the fault on the fence.
53" ground probe for most accurate readings.
Requires one 9V battery(not included).